Fiberplex SFP-HHDVR-0000-M HDMI 1.4 HD Video Receiver SFP Module

The Fiberplex SFP-HHDVR-0000-M is an electrical SFP receiver module designed to convert HDMI/DVI to an SDI signal output without scaling artifacts. The SFP-HHDVR-0000-L could support HDCP, by programming a key inside. Up to 8 channel of audio is supported and de-embedded from the HDMI signal.

The SFP-HHDVR-0000-M provides module identification information, configuration and diagnostic monitoring through a 2 wire serial interface. It is also a hotpluggable solution for field system upgrade and maintenance.

The SFP-HHDVR-0000-M is interchangeable with other MSA optical video SFP, coaxial SFP and SFP converter improving product flexibility. Ganged cages, belly-to-belly and superposed cages mounting are supported. The module provides reduced development risk and cost.

Flexibility:
Build a totally optimized system by mixing electrical SDI, NTSC/PAL converter, HDMI/DVI and optical video SFP.

Cost:
Design cost effective system.

Modularity:
Allow hot scalability and replacement of critical components wherever possible.

Density:
Highest density ever achieved for SDI to HDMI/DVI and HDMI/DVI to SDI converters.

Interchangeable:
Fully compatible with existing MSA video optical SFP, SDI SFP and SFP converters.

Hot-Pluggable:
Swap without affecting system behavior.

Advanced Packaging:
Support ganged cages, belly-to-belly and superposed cages mounting.

Typical Applications:
Multi-channel/multi-media transport with WDM-16
Cost effective SDI monitoring solution
Processing cards
SDI switchers
Video routers
Broadcast cameras

Compliance: The SFP-HHDVR-0000-L is Pb-free and ROHS compliant

Features:

• SMPTE 424M, 292M and 259M compliant.
• Supported format: 25/625, 720p/1080i (50/59.94/60Hz), 1080p (23.98/24/15/29.97/30/50/59.94/60Hz).
• HDMI/DVI Input: 24 bit (3x8 bits).
• RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4.
• BW = 150Mhz.
• RGB Range (Full/SMPTE).
• Up to 8 channel audio de-embedding (PCM).
• HDMI 1.4 Type D connector.
• HDMI Type D plug with retention.
• HDCP supported.
• Control via serial interface including: Voltage & Temperature Monitoring.
• HDMI/DVI interface configuration.
• EDID reading, Audio mapping.
• Module Information.

Specifications:

• Low Power Consumption Single Supply +3.3V
• 58.5mm x 13.4mm x 8.6mm SFPPackage
• Operating temperature: 0°C to 70°C