Fiberplex SFP-BA10X-0000-M MADI (AES10-2003 compliant) SFP Module

The SFP-BA10X-0000-M is a medium reach electrical transceiver module designed to transmit and receive MADI signals up to 125 Mbps over 75ohm coaxial cables via HD-BNC connectors. The cable driver amplitude and edge rate are automatically configured in order to achieve compliance to AES10-2003.

These MADI modules are also available as dual transmit and dual receive modules for use in the TD-6010. These dual units are non-MSA compliant and would not be compatible with the WDM16.
Understanding MADI.
For numerous users this optical interface is a mystery.Very few have ever dealt with huge cabinets full of professional network technology. Therefore, here are some explanations regarding `MADI optical': The cables have an internal fibre of only 50 or 62.5 m (microns) in diameter and a coating of 125 m. The plugs used are an industry standard, called SC. The cables are available as a duplex variant (2 cables being glued together) or as a simplex variant (1 cable). The transmission uses the multi-mode technique, which supports cable lengths of up to almost 2000 meters.

MADI is being used as a multi-Channel link between mixing consoles, DAWs or multi-track recorders or other digital outboard gear, as a transmission format in large scale digital audio routing systems, to transmit digitized microphone and line signals from a stage box to a theatre or studio mixing console.

Features:

• Meet Electrical Specifications of AES10-2003.
• Available as Tranciever, Dual RX or Dual TX.
• HD-BNC connectors (75 ohm).
• Integrated Equalizer: Typical length of Belden1694A cable, 100m at 125Mb/s.
• Integrated Cable Driver; Control via serial interface including, Input signal detection, Voltage & Temperature Monitoring, Module Information.

Specifications:

• Power Consumption; typical 615 mW Single Supply +3.3V.
• 56.6mm x 13.4mm x 8.6mm SFP Package.
• Extended Temperature Range -40°C to 80°C.