Doug Fleenor Design GIZMO DMX512 Test Box-Transmit/Receive/Save Playback Scenes

The Doug Fleenor Design GIZMO can transmit, receive, save and playback scenes, and perform a variety of data and cable tests. It features a rugged 1/10" aluminum enclosure, a 16 character by 2 line back lit display, an optically isolated input, a slew-rate limited output, a NiMH rechargeable battery good for four hours of continuous testing, and a five year warranty. A nylon carrying case and AC adapter/charger are included. The full numeric keyboard provides direct channel access and level setting without the need for scrolling. Up to one hundred scenes can be stored in the GIZMO. These can be captured from incoming DMX or built using the AND, THRU and AT keys.

Features:

• Receive DMX512 - Receive and display data in several formats. The operator can view all 512 channel levels, selected levels, non-zero channels, the refresh rate, number of channels transmitted,
• received start codes, flicker, and pass through mode for troubleshooting problems.
• Save and Recall 100 Scenes - Save and restore snapshots of DMX512 levels. The GIZMO can save and recall up to 100 scenes of either the currently received DMX levels or transmitted data.
• Continuity, Pin Correctness and Data Reliability - Tests check cables for shorts, open connections, and data reliability.
• LCD Display - Two line back light display, visible in the dark or direct sunlight with the low power back light display.
• 9 Volt Battery or AC Power Operation - Uses a typical 9 volt battery or included A/C (wall mount) supply.
• Durable Metal Housing - The .10" aluminum enclosure can withstand on the road travel
• Padded Carry Case Included - Manufactured by REELINE features a layer of closed cell foam to protect against moisture.
• 25 Button Key pad - Full keypad with CLEAR, ENTER, ALL, AND, THRU and TOP buttons.
• Five Year Warranty - We want you to know it works great.

Specifications:

• Input baud rate: 250 Kb/s
• Input circuit: ESD protected EIA-485 transceiver (LT1785)
• Input signal: 3 volts minimum, 12 volts maximum
• Input connector: Male Gold plated 5 pin XLR (Neutrik D-1 series). Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+. Cable check on pin 4 and pin 5
• Output isolation: 600 Volts
• Output baud rate: 250 Kb/s
• Output circuit: ESD protected EIA-485 transceiver (LT1785)
• Output signal: DMX512-A
• Output connector: Female Gold plated 5 pin XLR (Neutrik D-1 series). Pin 1 = common, Pin 2 = Data-, Pin 3 = Data+ Cable check on pin 4 and pin 5
• User interface: 25 button keypad and two line 16 character backlit LCD display
• Battery: Provided with 9 Volt NiMH rechargeable or User provided 9 Volt Alkaline (see "Notes On The Battery")
• Wall power supply: Input: 100 - 240VAC 0.5A Max. 50/60 Hz
• Output: +15V DC 0.666A
• Connector: 2.5mm type with the center conductor as positive
• Power input: 15VDC 0.075A
• Connector: 2.5mm type with the center conductor as positive
• Color: Front black anodized, rear red clear powder coat
• Size and weight: Chassis 6.75" L x 3.5" W x 1.4" H, 16 ounces; Power supply: 2.2" L x 1.9"w x 1.0" H, 5 ounces