Behringer Europower EP4000 4000 Watt Power Amplifier

The Behringer EP4000 builds on the incredible legacy of the EP2500, which is one of the best-selling power amps in the industry. Their proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet - and keep them there! With an amazing 4,000-Watts of output power (2x 2,000W @ 2Ω; 2x 1,400W @ 4Ω; 4,000W @ 4 Ω in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

The über-simple front panel controls of these amps give you all of your sound's vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That's called Transient Response and it's the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of their circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

The rear panel of every Behringer EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into "clipping" and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics - and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system's capabilities) - for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

There are lots of awesome features on the outside of the EP4000, but this amplifier's beauty goes much more than just skin-deep. Inside you'll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the EP4000 comfortably within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

Features:

• 2x 2,000W into 2Ω; 2x 1,400W into 4Ω; 4,000W into 4Ω (bridge mode)
• ATR (Accelerated Transient Response) technology for ultimate punch and clarity
• Switchable limiters offer maximum output level with reliable overload protection
• Detented gain controls for precise setting and matching of sensitivity
• Precise Power, Signal and Clip LEDs to monitor performance
• XLR and 1/4" TRS input connectors for compatibility with any source
• Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
• Selectable low-frequency filters remove damaging infra-sound frequencies
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
• High-current toroidal transformer for ultra-high transient response and absolute reliability
• "Back-to-front" ventilation system including air filter for reliable operation
• "Built-like-a-tank" impact-resistant, all-steel 2U rackmount chassis
• Designed and engineered in Germany

Specifications:

• Output Power:
• RMS @ 1% THD (Sine Wave), Both Channels Driven: 550W @ 8Ω/chan.; 950W @ 4Ω/chan.; 1250W @ 2Ω/chan.
• RMS @ 1% THD (Sine Wave), Bridged Mode: 1750W @ 8Ω; 2400W @ 4Ω
• Peak Power, Both Channels Driven: 750W @ 8Ω/chan.; 1400W @ 4Ω/chan.; 2000W @ 2Ω/chan.
• Peak Power, Bridged Mode: 2800W @ 8Ω; 4000W @ 4Ω
  
  Frequency Response:
• @ 10dB Below Rated Output Power: 20Hz - 20kHz, +0/-1dB
• @ -3dB points: 5Hz - 50kHz
  
  Power Supply:
• Mains Voltage/Breaker: 100 - 120V~, 50/60Hz: 15A; 220 - 230V~, 50/60Hz: 8A
• Power Consumption: 2600W
• Mains Connector: Standard IEC receptacle
  
  
• Distortion:
• Damping Factor: >300 @ 8Ω
• Noise, Unweighted, 20Hz - 20kHz: -100dB
• Voltage Gain: 50x (34dB)
• Input Sensitivity - V RMS (@ 8Ω): 1.15V (+3.4dBu)
• Input Impedance: 10k&Omega unbalanced, 20kΩ balanced
• Controls: FRONT: Power Switch, Gain Control (Ch. 1 & 2); REAR: DIP Switches (10x)
• Indicators: POWER: Green LED; CLIP: Red LED, 1/ch.; SIGNAL: Yellow LED, 1/ch.
• Connectors: Input: Balanced XLR and 1/4" TRS connectors; Outputs: Touch-proof binding posts and professional speaker connectors
• Cooling: Continuously variable speed fan, back-to-front air flow
• Amplifier Protection: Full short circuit, open circuit, thermal and HF protection Stable into reactive or mismatched loads
• Load Protection: Turn-on/off muting, AC coupling
• Output Circuit Type: Class H complementary linear output
• Dimensions (HxWxD): Approx. 3.5" x 19" x 15.8"
• Weight: Approx. 36.6lbs

Warranty:

• 3 Year