AVPro Edge AC-EX100-UHD-R3 HDBaseT Receiver with IR / RS232 / Ethernet

The AVPro Edge AC-EX100-UHD-R3 is a 100m HDBaseT Tx/Rx with RS-232, IR, Ethernet and EDID Management. This long range (100m, 330ft. up to 4K30) HDMI extension device is unrivaled with it's unique set of features. The receiver was designed to be a true problem solver, when the situation requires more power, distance, added Ethernet and reverse power or control, the Bad A** Extender or B.A.E has it covered. Using the most powerful HDBaseT technology on the market, this product is sure be a long-lasting part of your video distribution infrastructure.

The B.A.E features advanced functions like:

Ethernet Hub - The transmitter and receivers both have Ethernet ports acting as a bi directional Ethernet hub.

EDID Management - Select from preloaded EDID's so you can have total control over the active source.

Key benefits of using AC-EX100-UHD:

Ultra High Definiton: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25FT. Additionally, HDMI connectors can only be terminated in specialized factory environment due to its extremely high frequencies and high density. This does not allow installers or users to remake or make cables on a DIY basis. CAT-5E/6A cables are available widely and can be reworked easily by the installer or end-user. AVPro Edge's AC-EX100-UHD supports 4K up to 70M (230ft) with crystal clear 4K Resolution & 100M (330ft) on 1080P

Distance: By using AC-EX100-UHD, the transmission distance for HD 1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft)

EDID Management: Control the source device with EDID management. With the multitude of sources out there, this feature allows you to fix a known good EDID so the source device knows what to output.... every time.

Control: IR & RS-232 are bidirectional and can control the sources from the sinks or vice versa. This allows unlimited flexibility when controlling sinks, and sources. Control the rack or source and the display or sink over the same single wire.

I-Pass: Plug you Control System emitter ports directly into the IR port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through, our unique VPC (Voltage Protection Circuit) allows you to do this without wear and tear on the sensitive electronics inside.

Ethernet Extention: When working with any AC-EX100WPP-UHD-T, AC-EX100TT-UHD-T or AC-EX100-UHD-T transmitter, you gain the ability to extend any network or ethernet signal. With the additional ethernet ports on these extender units you have a bi-directional Ethernet hub.

Audio Extraction: Use the AC-EX100-R3's audio extraction port to distribute audio directly into an audio amplifier or AVR. This gives you the ability to control the audio separately from the video signal.

Bi-Directional Power: When power at the rack is not an option. For instance, there is simply too many power supplies, or it is difficult to get to, with The B.A.E. you have the option to power the transmitter from the receiver (your option).

Other Applications:

Ultra-long distance 4K HDMI Extension (70m, 230ft on 4K) (100m, 330ft on HD). Think auditorium, large classrooms, large homes, long home runs.

Insert to manage a problem source or add a 4K source. This extender can be placed in a system to properly manage sources with EDID, or upgrade a source to 4K.

Note: - Most extender products can only do short range on 4K, these go further than others on the market.

Extended Ethernet (internet) distribution. These connect and act as additional hubs for LAN connections. You can easily supply the local sources with reliable wired connections for internet rather than Wi-Fi. Perfect for local gaming systems, Blu-ray players, computers and more.

Features:

• HDMI 2.0
• 4K60 4:2:0, 4K30 4:4:4
• HDR Support up to 4:2:2 12 Bit
• Supports 3D
• HDCP 2.2 & Earlier
• CEC Pass Through
• 100M (330ft) on 1080P (Cat6a)
• Up to 70m (230ft) on 4K (Cat6a)
• Ethernet hub & extension
• EDID Management
• I-Pass Feature for control system "pass-through IR"
• 3-20v protection circuit built in for safe IR transport
• Bi Directional RS232 Transport
• ieee PoE for universal HDBaseT Installations
• Compatible with HDBaseT displays, projectors, AVR's
• Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, Atmos via HDMI

Specifications:

Video
• Video Resolutions: Up to 4k60 4:2:0 & 4k30 4:4:4
• Vesa Resolutions: Up to 2560x2048 (QSXGA)
• HDR Resolutions: 4k24 4:2:2 12 bit, 4k24 4:2:0 10 bit
• VGA Resolutions: Up to DCI 2K, 1080P 60, 1900x1080x60
• Color Space: YUV, RGB (CSC:REC. 709, BT2020, DCI, P3 D6500)
• Chroma Subsampeling: 4:4:4, 4:2:2, 4:2:0 supported
• Deep Color: Up to 16 bit 108-p, up to 12 bit 4K
  
  Audio
• Audio Formats Supported: PCM 2.0 CH, LPCM 5.1 & 7.1, Dolby Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, Dobly Atmos
• Audio Formats Supported Extracted (2ch): PCM 2 ch (no DOWNMIX)
  
  Distance
• HDBaseT (CAT) Distance (4K): 70M (230 feet)
• HDBaseT (CAT) Distance (Full HD): 100M (330 feet)
• HDMI Lead In/Out: Up to 50 feet (using bullet train HDMI)
• HDMI Lead In/Out (with AOC cable): Up to 130 feet (using bullet train AOC)
  
  Other
• Bandwidth: 10.2 GBPS
• HDCP: HDCP 2.2 and earlier
  
  Ports
• HDMI: Type A
• IR Out: 3.5mm momo (2 conudctor for emitter)
• IR In: 3.5mm mono (2 conductor for control system direct only)
• RS232 (device control & pass through): 3 pin terminal block
• Power: 2 pin terminal block each
• Ethernet: 2x RJ45 connections each (10/100)
  
  Environment
• Operating Temperature: 23 to 125°F (-5 to 51°C)
• Storage Temperature: - 4 to 140°F (-20 to 60°C)
• Humidity Range: 5-90% RH (no condensation)
  
  Power
• Power Consumption: 9 watts max pair
• Power Supply: Input - AC 100-240V ~ 50/60Hz; Output - DC 48V .5A (wall version)
  
  Dimensions
• Unit Only (L x W x H): 5.43 inch x 3.35 inch x 1 inch ( 138 x 85 x 25 mm)
• Packaged (L x W x H): 8 inch x 6.5 inch x 3.6 inch (203 x 165 x 91 mm)
• Weight: .3 llbs / .13 kg
• Packaged Weight: 1 lbs / .90 kg

Item Includes:

• AC-EX100-UHD-R3 (Receiver)
• 48V Power Supply (One supplied)
• 1 x IR Tx Unit
• 1 x IR Rx Unit
• Mounting Ears x 2
• 3-Pin Phoenix for RS-232 Port