Artel 8000-EQ000-BOM ARG 8000 ARQ 1RU-Web-Dual PSU-Single
- Brands Artel Video Systems
- Product Code:ARTL-8000EQ000BM
- Availability:In Stock
-
$6,195.00
Being scalable in single stream increments, broadcasters can quickly add extra ARQ licenses to deliver multiple IP UDP unicast and multicast services.
The ARG ARQ TX license takes a standard TS from any encoder as ASI or IP and adds additional overhead to a standard UDP IP Packet which is sent onto the ARG ARQ RX. The RX uses this additional overhead to check the integrity of the stream. Any jitter, out of order packets, corrupt packets or lost packets will be re-established with packet resends and intelligent buffer management. All packets sent between TX and RX ARQ units are UDP. At each TX and RX site a single configurable UDP port per TS will need to be open for normal operation. All management is http on port 80.
Features:
- Ideal for contribution, distribution, microwave/satellite backhaul over fixed or unconditioned IP broadcast networks and timing over packet networks for synchronous Ethernet time critical broadcast services.
- Available as a 1RU rackmount or compact unit
- Optional fully managed carrier grade Ethernet switch with SNMP and web server for configuration and control with up to 6 x 10/100/1000 Copper Ethernet ports plus 2x GigE SFP ports.
- IEEE 1588 PTPv2 highly accurate to within 2 nanoseconds
- Up to four optional DVB-ASI ports, configurable as inputs or outputs each providing up to 170 Mbps bandwidth throughput
- 1RU unit has dual auto ranging power supplies
- Fast boot up and service active time
- Low power consumption on compact unit
- Fully management Ethernet switch optional
Specifications:
- General - 1RU Unit
- Maximum Throughput: 800Mbit/s
- AES: 128bit Encryption
- Connectors Without Carrier Class switch fitted: 3 GigE ports; 2x USB; 2 x IEC mains sockets
- Interfaces With Carrier Class switch fitted: 4 x GigE ports + 2 x SFP's; 2 x IEC mains sockets; ASI Interfaces
Mechanical - Dimensions: 1RU x 19" x 15"
- Weight 12.31 lbs - depending on modules fitted
- Power Supply: Dual supply single phase auto-ranging 100-240VAC (50-60Hz)
- Power consumption: Typically 30 Watts
- Management & Control: Configuration and control via web server
- DVB-ASI Interface Optional: Selectable TX or RX Max throughput 170 Mbps SMPTE 2022-1 compliant with COP3 FEC