Teradek BEAM-570 Long Range HD-SDI Transmitter and Receiver AB Mount

The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps.* Beam utilizes the unlicensed 5GHz band and can transmit video up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.

With a 3G-SDI input and your choice of AB-Mount (570) or V-Mount (571) battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and a bidirectional serial port for camera control.

Beam is multicast capable to up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field. Beam also supports high power transmission on the 5.15 ~ 5.25GHz band in accordance with FCC regulations. This means that your wireless video feed will be more resilient and get better range.

Beam is compatible with the RTSP and MPEG-TS protocols, giving broadcasters the ability to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.

*Transmitting above 30Mbps requires using the LAN port.

Features:

• Up to 2500ft range over WiFi!
• Low Latency 70ms - 80ms!
• Transmits to up to 4 receivers over WiFi
• High bit-rate broadcasts - up to 30Mbps over WiFi, 50Mbps over LAN
• OLED Display for easy setup and status monitoring
• Rugged Enclosure, transmitter mounts to any AB or V-mount camera
• Supported inputs and resolutions: 480i 59.94/60, 576i50, 720p50, 720p 59.94/60, 1080PsF 23.98/24, 1080p 23.98/24, 1080p25, 1080p30, 1080i50, 1080i 59.94/60, 1080p50, 1080p 59.94/60
• Blu-Ray quality video over any IP network, Utilizing H.264
• Multicast capable over 10/100 Ethernet
• 3 x MIMO Access Point
• Full IFB support with microphone input and headphone output
• Looping HD-SDI output on transmitter
• Bidirectional Serial Data pass-through
• MPEG-TS included!
• Transceiver sets ship in sturdy Pelican cases

Specifications:

• Video Compression: H.264 Baseline Profile Level 4.2 with de-interlacing
• System Latency: 90 - 110 millisecond delay between Transmitter and Receiver
• Wireless range: 2500ft +- 200ft
• Digital Video In/Out: SD-SDI, HD-SDI, 3G-SDI
• Video Port TX: SDI input and looped Output, RX: SDI output
  
  
• Supported Video Resolutions:
• SMPTE244; 480i59.94 (NTSC), 480i60 (861-D) IEC61179-5; 576i50 (PAL)
• SMPTE 296M; 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
• SMPTE 274M; 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
• SDI Compliance:
• SMPTE 259M BI.656; SDTV Digital Signal/Data Serial Digital Interface
• SMPTE 292M BT.1120; 1.5Gb/s Signal/Data Serial Digital Interface
• SMPTE 425M (option); 3Gbis Signal/Data Serial Digital Interface
• SMPTE 299M; 16bit Digital Audio Format for SMPTE 292M
• SMPTE 352M, Video Payload Identification for Digital Interfaces
  
  
• Bitrate: RTSP Server; Up to 30Mbps; MPEG2-TS Server; Up to 15Mbps
• Main Digital Audio In/Out: TX/RX; SDI embedded audio: 48kHz 16-bit stereo linear PCM
• Main Analog Audio Out: RX; 48kHz 16-bit stereo linear PCM with mini stereo phone output jack
• Talk-Back Analog Audio In/Out: RX/TX; 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
• Radio Power: Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
• Radio Standard: IEEE 802.11a/n: OFDM
• Frequencies: U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
• Antenna: 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
• Security: 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
• WPS: Wireless Protected Setup for easy set up and security configuration
• Ethernet LAN: 10/100 BASE-TX, RJ-45 jack
• Multicast: WiFi: Up to 4 Receivers; LAN: No limit on number of receivers
• External Control: Full duplex RS422 serial port
• USB: Factory reset, IP configuration or firmware upgrade without PC
• Power Input/Consumption: DC 6.6V-16V, 12 Watt
• Dimensions (H x W x D) (mm): 170 x 105 x 28 each board assembly (TX or RX)
• Weight (g): 140g each board assembly (TX or RX)
• Operating Temperature: 0 deg C to 50 deg C

Item Includes:

• 1 Beam Tx
• 1 AB-Mount or V-Mount Battery Plate
• 1 Beam Rx
• 1 Teradek Protective Case