Furman PL-PLUS C Power Conditioner with Voltmeter - 15 Amp

The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman's revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.These units are great for many applications! Lets take a look at just a few of them............

Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on.

Recording
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

DJ Equipment
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out. The dual pull-out front panel lights also let you discreetly see your board and gear without distracting from the show on the dance floor.

Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

The applications are endless and at prices like these there's no excuse to be without at least one!

Features:

• SMP (Series Multi-Stage Protection) with EVS (Extreme Voltage Shutdown).
• LiFT (Linear Filtering Technology) with zero ground contamination.
• 20-segment LED tri-color AC voltage meter (allows easy verification of voltage range from a distance or in poor lighting).
• Two Smooth Track retractable, long-life, low-heat, front panel LED lights with dimmer-power switch for rack illumination.
• BNC connector on the rear panel accepts any standard (12VAC 0.5 amp) gooseneck lamp to illuminate the rear of your rack, (Furman GN-I and GN-LED accessory gooseneck lamps are best for this application).
• Eight rear panel AC outlets, three with wide spacing to accommodate large AC transformer plugs (wall warts).
• One front panel convenience outlet.
• 15A (1800 watt) capacity with 15A circuit breaker.
• Five year limited warranty.

Specifications:

• Maximum Output Current: 15 amps
• Line Cord: Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
• Pull-out Lights: Two multi-LED, dimmable lamps
• BNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)
• Operating Voltage: 90 to 139 VAC
• Spike Protection Mode: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 Amps
• Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
• Dimensions: 19" W x 10.5" D x 1.75" H
• Weight: 12 lbs.
• Power Consumption: 12 watts
• Safety Listing: cTUVus