Furman PL-PRO C Power Conditioner with Voltmeter - 20 Amp

The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge suppressors.These units are great for many applications! Lets take a look at a few of them............

Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on.

Recording
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

DJ Equipment
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out. The dual pull-out front panel lights also let you discreetly see your board and gear without distracting from the show on the dance floor.

Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

The applications are endless and at prices like these there's no excuse to be without at least one!

Features:

• Surge Protection: Furman's exclusive SMP technology provides the highest level of surge & spike protection available.
• Noise Filtration: LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.
• Voltage Protection: Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
• Pull-out Lights: Dual smooth track retractable LED lights illuminate equipment in your rack.
• Diagnostic Lights: LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
• USB Charger: Front panel convenience charger allows you to charge most media devices or power a USB lamp.
• LED Voltmeter: Segmented LED voltmeter monitors and displays incoming line voltage.
• Isolated Banks: Isolated outlet banks minimize inter-component interference and noise contamination.
• Wall Wart Spacing: Three widely spaced outlets accommodate bulky AC power transformers.
• 20 Amp Rating: 20 Amp rating featuring a high inrush magnetic circuit breaker for added protection.
• Nine Total Outlets: Nine total outlets (8 rear panel outlets and one front panel convenience outlet).
• BNC Lamp Connector: Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.

Specifications:

• Maximum Output Current: 20 amps
• Line Cord: Captive 3/12 AWG, 10 ft. black cord with NEMA 20 plug
• Pull-out Lights: Two multi-LED, dimmable lamps
• BNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)
• Operating Voltage: 90 to 139 VAC
• Spike Protection Mode: Line to neutral, zero ground leakage
• Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
• Response Time: 1 nanosecond
• Maximum Surge Current: 6,500 Amps
• Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
• Dimensions: 19” W x 10.5” D x 1.75” H
• Weight: 12 lbs.
• Power Consumption: 12 watts
• Safety Listing: cTUVus