Electro-Voice EVF-1152D/66-BLK 15 Inch 2-way Full-Range Indoor Loudspeaker

The Electro-Voice EVF-1152D Single 15" 2-Way Full-Range Indoor Loudspeaker System is a high-power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required. It utilizes the DH7N 3" titanium compression driver, coupled to a Constant Directivity 60 x 60° waveguide. The system also uses DVX3151A 15" woofer, developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24 dB per octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability.

The loudspeaker system is enclosed in a 13-ply birch enclosure and coated with EVCoat for protection from elements. The acoustic and rigging design allows for vertical and horizontal clusters to be built using any combination of loudspeakers from the entire EVF and EVH series. A 70.7/100V transformer kit can be easily mounted to the input panel for use in distributed systems. The system offers 7 horn patterns with an assortment of low-frequency and subwoofer loudspeakers to maximize flexibility of system design as per your requirements. The input panel features a Phoenix-style connector. In addition, an externally accessible jumper selects passive or active operation.

Features:

• DH7N 3" diaphragm and 1.4" exit pure titanium compression driver
• DVX3151A 15" LF transducer with a fully symmetric drive
• Includes a Phoenix-style connector
• Fourth-order crossover network with HF protection
• Coverage pattern of 60 x 60° and Constant Directivity 12" rotatable waveguide
• 100 dB sensitivity and 134 dB maximum SPL
• Twenty-two M10 threaded suspension points

Specifications:

• Frequency Response: -3 dB: 70 Hz to 18 kHz
• Frequency Range: -10 dB: 40 Hz to 21 kHz
• Coverage: Rotatable: 60 x 60°
• Frequency: Receiver High Pass: 45 Hz
• Passive Crossover Frequency: 1300 Hz
• Axial Sensitivity: 100 dB (1 W @ 3.28' / 1 m) LF Transducer - DVX3151A: 100 dB (1 W @ 3.28' / 1 m) HF Transducer - DH7N: 114 dB (1 W @ 3.28' / 1 m)
• SPL: Maximum Calculated: 134 dB, LF Transducer - DVX3151A: 133 dB, HF Transducer - DH7N: 139 dB
• Passive: 600 W continuous, 2400 W peak
• LF Transducer - DVX3151A: 500 W continuous, 2000 W peak
• HF Transducer - DH7N: 75 W continuous, 300 W peak
• Impedance: 8 Ohms (nominal), 6 Ohms (minimum)
• LF Transducer - DVX3151A: 8 Ohms (nominal), 7.2 Ohms (minimal)
• HF Transducer - DH7N: 8 Ohms (nominal), 6 Ohms (minimal)
• Connectors: Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals
• Enclosure: 13-ply birch with EVCoat
• Grille: 16 GA powder-coated galvanneal with rotatable logo
• Suspension: 22 x M10 threaded suspension points
• Dimensions (H x W x D): 30.26 x 18.5 x 18.37" (768.6 x 469.8 x 466.6 mm)
• Weight: 75.7 lb (34.4 kg)