Artel FiberLink 7514-B1S 850nm Multimode DVI & 3.5mm Stereo Audio

The Fiberlink 7514 Series supports DVI transmission (up to 1920x1200) and stereo audio over one single mode or multimode fiber without compression, scaling or adjustments. It is ideal for Digital signage, broadcast or corporate studio, auditorium, stadium and theater, airport or transportation hub, distance learning, and surgical or medical imaging applications, to name a few!

The 7514 transmitter box provides a convenient DVI loop-thru port and the 7515 receiver provides 2 DVI outputs along with stereo audio. The 7514 transmitter will generate EDID information internally, acquire it via the DVI loop-thru, or you may capture and store EDID information.

Dual Optical Output Version Now Available! (MM version only)

Transmitter only. Receiver sold separately.

Features:

• Transmits single-link DVI (640 x 480 up to 1920 x 1200 - 165 MHz pixel clock)
• Supports HDTV resolutions of 480p, 720p, 1080i and 1080p (DVI format)
• Uses no compression, color space conversion or scaling for crystal clear signals
• Only one fiber used - no pixel skewing
• Supports up to 45 foot (13.72m) DVI input cable
• DVI Input loop-through on box version
• Supports EDID from loop-through, internal generation, or capture and storage.
• Requires no adjustments, equalization or de-skewing during installation
• Advanced input circuit equalizes and re-clocks noisy and distorted DVI input signals
• Two DVI outputs on box receiver allows for driving two monitors
• Transmits signals over one multimode fiber optic core using advanced CWDM multiplexing
• Low audio/video skew,
• Complete, ready-to-install kits are available for both Box and Card versions
• RoHS Compliant
• Not compatible with Fiberlink 7500, 7501 and 7502, 7510, 7511, 7512

Specifications:

• Video:
• Input Type DVI-D or DVI-I (digital signal only )
• single link
• Number of Video Channels 1 single-link DVI-D up to 1920x1200
• Video Processing 24 bits, no compression or scaling
• DVI Input Loop-through Yes; both box & card versions
• EDID (DDC) Support From loop-through, internal
• or capture & storage capability
• Pixel Clock Range 25 - 165 MHz, continuous
• Scanning System Supported Progressive or Interlaced
• Color Space Format Supported RGB or YPrPb
• Maximum Input Cable Length 45 Feet (13.72m)
• Maximum Output Cable Length 16 Feet (5m)
• Number of DVI Outputs 2 on box version, 1 on card version
• Audio
• Number of Audio Channels 2, unbalanced
• Frequency Response +0/-0.5 dB, 20 Hz - 20 kHz
• Bits-per-Sample/Sampling Rate 24 bits; >48 kHz
• Maximum Audio Level +10 dBu
• SNR (A-Weighted) 100 dB
• THD+N 0.001%, 20 Hz - 20 kHz
• Channel Phase Differential +0.1o
• Crosstalk 100 dB (1 kHz)
• Input Impedance >24K Ohms
• Output Impedance
• Audio to Video Diff. Delay (skew) 300 uSec
• General:
• LED Indicators Power, Video, Audio,
• Alarm LED (card version only)
• Power Requirements* 9-24 volts AC or DC, 10 watts,
• 34.12 BTU/Hr
• Operating Temperature Range -20oC to +45oC
• Optical Connector 7514/7515: ST x 1 7516: ST x 2
• Operating Wavelength SM: CWDM (1300-1600nm band)
• MM: CWDM (850nm band)
• Physical Size 6.5 W x 1.15 H x 8 L (inches)
• 165 W x 29 H x 203 L (mm)
• Weight 1 lb. (0.455 kg)
• Slots filled in 6000A Card Cage 3
• MTBF 45,000 Hours
• *For operation from 95-250 volts AC, 50/60 Hz, a PDPS-2 plug-in adapter is required.