Artel FiberLink 3519-B9S Singlemode 4-CH Bidirectional 3G-HD with 4K/UHD-30

The Fiberlink 3518 series supports 4 channels of independent, bidirectional 3G/HD/SD-SDI or DVB-ASI, with or without embedded audio and data, and transmits it over one single mode or multimode fiber. Now, you can send two 3G/HD/SD-SDI signals upstream and two 3G/HD/SD-SDI signals downstream!

All SMPTE compliant signals are equalized and reclocked. Each unit features two reclocked, non-inverting BNC outputs. The 3518 Series is compliant with SMPTE 259M-2006, 292-2006, 424M-2006, 305M-2005, 310M-2004, 344M-2000 and DVB-ASI. The series is immune to pathological patterns over entire link budget and operating temperature range. For maximum flexibility, the units may be configured with ST or LC optical connectors.

Fiberlink 3518 Series is ideal for any broadcast or professional video application: broadcast studios, sporting events, confidence monitoring, OB vans, video conferencing and more!

Fiberlink 3518 is also available in a 2 channel version, Fiberlink 3516 Series.

Fiberlink 3518 is also available in a 2 fiber version, Fiberlink 3528 Series.

Features:

• Supports 4 Channels: two upstream, two downstream
• Signals are equalized and re-clocked prior to fiber optic transmission
• Re-clocked SDI output
• Immunity to pathological patterns over entire link budget and operating temperature range
• Compliant with SMPTE ST 425-3, 259M-2006, 292-2006, 424M-2006
• Supports transmission of SMPTE 305M-2005, 310M-2004, 344M-2000, DVB-ASI
• Available in both Single Mode and Multimode (62.5u & 50u) versions
• Supports 3G/HD/SD-SDI inputs with or without embedded audio and data
• 19 dB Optical Link Budget @ 2.97 Gbps for High Power, Longer Distance version
• Wide operating temperature range: -10° C to +50° C
• Compatible with all CSI SDI transmitters and receivers using CSI CWDM products
• Available in Box and Card versions
• Card version compatible with the Fiberlink 6000A Rack Card Cage
• Designed and Manufactured in the USA by CSI

Specifications:

• Fiberlink 3518/3519 Transmitter Specifications
• Serial Video BNC Input
• Number of Inputs: 2
• Data Rate Range: 19.4 Mbps to 2.97 Gbps
• Supported Standards: SMPTE ST 425-3, 259M, 292, 424M-2006, 305M, 310M, 344M, DVB-ASI
• Re-clocked Data Rates: 270 Mbps (SMPTE 259M, DVB-ASI-270), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M-2006)
• Equalization: Automatic up to 100m of Belden 1694A at 3.0 Gbps, 140m at 1.485 Gbps and 180m at 270 Mbps
• Return Loss >10dB up to 2.97 Gbps
  
  
• Optical Output
• Connector: ST
• Wavelengths: 1510, 1530, 1550, 1570 (nominal)
• Emitter Type: DFB Laser
• Output Power: (nominal) +2 dBm
• Re-clocking: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
  
  
• Fiberlink 3518/3519 Receiver Specifications
• Fiber Optic Input
• Connector: ST
• Wavelength: 1100 - 1620 nm
• Minimum Input Sensitivity:
• -17 dBm at 2.97 Gbps
• -20 dBm at 1.485 Gbps
• -21 dBm at 270 Mbps
• Maximum Input Power: -1 dBm
  
  
• Serial Video BNC Outputs
• Number of Outputs: 2
• Signal Level: 800mV ± 10%
• DC Offset: 0V ± 0.5V
• Rise/Fall Time:
• 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
• Overshoot
• Timing Jitter
• Alignment Jitter
• Re-clocking At 270 Mbps, 1.485 Gbps & 2.97 Gbps
  
  
• Fiberlink 3518 & 3519 General Specifications
• 4K / UHD Support up to 30 fps using 2 inputs
• Link Timing Difference: 0.3nS/km of fiber
• Indicators:
• Power, Data Rate lock
• (SD, HD/3G)
• Box Version Dimensions:
• 6.5 W x 1.15 H x 6 L (inches)
• 165 W x 29 H x 152 L (mm)
• Weight: 12.3 ounces, 382 grams
• Slots in 6000A Card Cage: 2
• Power:
• 9-24 volts, AC or DC,
• 3518: 5.0 watts, 17.66 BTU/Hr
• 3519: 4.0 watts, 13.64 BTU/Hr
• Operating Temperature: -10° C to +50° C
• MTBF: 72,000 Hours