Artel FiberLink 3391-B7S One-Way 3G/HD/SD-SDI with Two-Way Audio/Data/Ethernet

The SDI Flex 3390 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 as well as DVB-ASI. If you have previously embedded audio or data into your SDI signal, the SDI Flex will retain the audio and data, bit-for-bit, throughout the entire transmission process.

In addition to pristine, broadcast quality SDI, the Fiberlink SDI Flex 3390 can transmit bidirectional audio, RS-Type data, Ethernet and even contact closure! Best of all, all channels are independent and available simultaneously!

And the SDI Flex 3390 is designed to be flexible in more ways than the signals it supports: Choose from ST or LC connectors, transmission over one or two fibers, and single mode or multimode to match your specific environment, requirements and budget.

To ensure signal intergrity, all signals are equalized prior to fiber optic transmission and re-clocked on the receiver. Both the transmitter and receiver are immune to pathological signals over the entire budget link and operating temperature range.

Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!

Features:

• 3G/HD/SD-SDI signal transmission with two-way audio, data, 10/100Base-T Ethernet and contact closure.
• One-fiber and two-fiber versions for single mode and multimode fiber types.
• All channels are independent and available simultaneously.
• SDI signal is equalized and re-clocked prior to fiber optic transmission.
• SDI output is re-clocked after optical reception.
• ASI signals also supported.
• Compliant with all applicable SMPTE standards.
• Wide operating temperature range: -10C to +50C.
• Available in Box and Card versions.
• ST or LC connectors available.

Specifications:

• General Specifications
• Number of Fibers Required:
• 3390/3391: 1
• 3392/3393: 2
• Indicators: Power, Data Rate lock (3G, HD, SD/DVB-ASI), Audio Activity, RS-Data Activity, Ethernet LEDs on RJ45 Connector, Alarm (Card Version Only)
• Box Version Dimensions: 6.5 W x 1.15 H x 8 L (in) 165 W x 29 H x 203 L (mm)
• Weight: approx. 1lb.; 0.45kg
• Slots in 6000A Card Cage: 2
• Power:
• 9-24 volts, AC or DC,
• 3390/3392: 7.5 watts, 25.6 BTU/Hr
• 3391/3393: 7.5 watts, 25.6 BTU/Hr
• Operating Temperature: -10° C to +50° C
• MTBF: 27,000 Hours
  
  
• Transmitter: Serial Video BNC Input
• Number of Inputs: 1
• Data Rate Range: 19.4 Mbps to 2.97 Gbps
• Supported Standards: SMPTE 259M, 292, 424M-2006, 305M, 310M, 344M, DVB-ASI
• Re-clocked Data Rates: 270 Mbps (SMPTE 259M, DVB-ASI-270), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M-2006)
• Equalization: Automatic up to 100m of Belden 1694A at 3.0 Gbps, 200m at 1.485 Gbps and 350m at 270 Mbps
• Return Loss: >10dB up to 2.97 Gbps
  
  
• Receiver: Serial Video BNC Output
• Number of Outputs: 1
• Signal Level: 800mV ± 10%
• DC Offset: 0V ± 0.5V
• Rise/Fall Time:
• 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M
• Overshoot:
• Timing Jitter:
• Alignment Jitter:
• Re-clocking: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
  
  
• Transmitter: Optical Output
• Connector: LC or ST
• Wavelengths Used:
• 3390/3391: 1510nm, 1530nm, 1550nm, 1570nm
• 3391/3392: 1310nm, 1490nm, 1550nm
• Emitter Type: Laser
• Output Power (Nominal): -3.0 dBm
• Re-clocking: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
  
  
• Receiver: Optical Input
• Connector: LC or ST
• Wavelength: 1100 - 1620 nm
• Minimum Input Sensitivity:
• -17 dBm at 2.97 Gbps;
• -19 dBm at 1.485 Gbps
• -19 dBm at 270 Mbps;
• Maximum Input Power: 0 dBm