Artel Fiberlink 3113 Internal Battery/DC Powered 3G/HD/SD-SDI

The SDI Beamer Series is used to transmit 3G/HD/SD-SDI with or without embedded audio and data over a single fiber optic core. The FiberLink SDI Beamer Series is compatible with single mode or multimode fiber. The SDI Beamer is also compliant with SMPTE 297-2006 for seamless interoperability with other SMPTE 297-2006 devices. The system delivers noise-free transmission that retains all of the signals' initial parameters, regardless of fiber optic cable attenuation. The SDI Beamer Series also provides immunity to video pathological signals over the entire link budget and operating temperature range.

Please Note: Receiver only! Transmitter sold separately! Sold as a full Tx/Rx kit under part# CSI-SDI-BEAMER

Features:

• Equalized transmitter input and re-clocked receiver output
• Supports 3G/HD/SD-SDI and DVB-ASI transmission
• SMPTE compliant electrical and optical inputs and outputs insures interoperability
• Support both multimode and single mode fibers• Immunity to pathological patterns
• Exclusive Artel optical circuit design for unmatched performance
• Wide range optical link budget
• Industry preferred ST optical connector with chain-attached ST dust cap
• Wide power supply options: internal 9 volt battery, external DC power, AC adapter
• Locking ring power connector
• Long 5 hour battery life
• Glitch-less battery backup when using external power source and internal 9 volt battery
• Compatible with all other Artel FiberLink SDI products
• 3G/HD/SD-SDI - This product supports SMPTE complaint 3G, HD and SD-SDI data rates.

Specifications:

• SERIAL VIDEO BNC INPUT
• ALIGNMENT JITTER:
• DC OFFSET: 0V ± 0.5V
• NUMBER OF OUTPUTS: 1
• OVERSHOOT:
• RECLOCKING: At 270 Mbps, 1.485 Gbps & 2.97 Gbps
• RISE/FALL TIME:
• SIGNAL LEVEL: 800mV ± 10%
• TIMING JITTER: FIBER OPTIC INPUT
• CONNECTOR: ST, with chain-attached dust cap
• MAXIMUM INPUT POWER: 0 dBm
• MINIMUM INPUT SENSITIVITY: -18 dBm at 2.97 Gbps; -20 dBm at 1.485 Gbps -20 dBm at 270 Mbps;
• WAVELENGTH: 1100 - 1620 nm
  GENERAL SPECIFICATIONS
• APPROXIMATE INTERNAL BATTERY LIFE: 3 hours, 30 minutes with Lithium battery 1 hour, 50 minutes with Advanced Alakaline battery 1 hour, 30 minutes with Alakaline battery
• DIMENSIONS: 2.4 x 4.47 x 1.06 (in) (60.96 x 113.53 x 26.92 (mm))
• INDICATOR: Power/Battery
• MTBF: 175,000 Hours
• OPERATING TEMPERATURE -10° C to +50° C
• POWER: External 9-24 volts DC or user supplied internal 9 volt battery. Internal battery can be used for glitch-free backup to external power source or battery only operation.
• POWER CONNECTOR: Coaxial type with locking threads; 5.5mm O.D., 2.1mm I.D.
• POWER DISIPATION: Transmitter: 1.20 Watts, 4.09 BTU/hr Receiver: 1.20 Watts, 4.09 BTU/hr
• SWITCH: Internal Battery On/Off
• WEIGHT: 4.23 oz. with batt., 2.60 oz without batt.

Item Includes:

• 1x FiberLink SDI Beamer Receiver
• 
  1x User Manual

Warranty:

• 3 Years