DPA SCO61B10-N53 Omni STD Sens Necklace Lav Mic - 53cm - Hardwired TA4F

Sometimes convenient mounting and consistent output are the primary requirements. In these cases, the d:screet™ Necklace 4061 Microphone is the right solution. The mic features the legendary d:screet 4061 Miniature Omnidirectional Capsule in a soft rubber necklace. This d:screet Necklace 4061 Microphone is the best choice for fast, repeatable and "do-it-yourself" mounting. The mic is designed for use by non-technicians. It is, for example, the perfect choice for a reality show setting.

With low noise and high sensitivity, the d:screet Necklace 4061 Microphone offers the most clear, transparent, and natural sound available on the miniature mic market. This condenser mic is capable of handling up to 144 dB peak before clipping. It has a linear response, low distortion and a large dynamic range. This necklace mic sounds great no matter the application.

The mic comes in three colors: black, white and brown. It is available in two lengths: 47 cm (18.3 in) or 53 cm (20.9 in). The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make the switch, you won't hear any loss or change in sound quality.

The d:fine™, d:screet and d:vote™ series of miniature microphones work with all leading wireless mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony, Wisycom, Zaxcom and many more. DPA Microphones’ ingenious adapter system is one of a kind in the industry. It protects your investment in fantastic sound for years to come.

Features:

• Plug and play mounting
• Consistent output
• Minimal visual impact
• Modular adapter system fits most professional wireless systems

Specifications:

• Directional pattern: Omnidirectional
• Principle of operation: Pressure
• Cartridge type: Pre-polarized condenser
• Frequency range: 20 Hz - 20 kHz
• Frequency range, ±2 dB: High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
• Total harmonic distortion (THD):
• Dynamic range: Typ. 97 dB
• Max. SPL, peak before clipping: 144 dB
• Output impedanceFrom MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
• Output balance principle: Signal balanced with DAD6001-BC XLR Adapter
• Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
• Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
• Connector: MicroDot
• Color: Black
• Weight: 17 g (0.04 oz) incl. Cable and MicroDot connector
• Microphone diameter: 0.21 in
• Microphone length: 20.7 in (53 cm)
• Cable length: 3.9 ft (1.2 m)
• Cable color: Black
• Cable diameter: 0.06 in
• Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
• Temperature range: -40°F to 113°F
• Relative humidity (RH): Up to 90%