D-Link DGS-1510-28P Ethernet Switch-28 Network 2 Expansion Twisted Pair Optical

The DGS-1510-28P Series is D-Link’s latest generation of stackable Gigabit switches with 10G port connectivity, suitable for business networks of all sizes. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 and 48 10/100/1000 Mbps port models, these switches also include four optical ports - including two or four 10G SFP+ ports.

Power over Ethernet (DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP only)
All 10/100/1000 Mbps ports on the DGS-1510-28P, DGS-1510-28XMP and DGS-1510-52XMP are PoE-enabled, for powering devices such as IP cameras, VoIP phones and wireless access points. Compliant with IEEE 802.3af and IEEE 802.3at, these models support up to 30W of power output on any particular PoE port. The total PoE power budgets are 193W for the DGS-1510-28P, and 370W for the DGS-1510-28XMP and DGS-1510-52XMP. Additionally, the power budget for the DGS-1510-52XMP can be increased to 740W when utilized with the DPS-700 redundant power supply, allowing the switch to power even more devices.

Time-based PoE enables power to a port to be shut off at a scheduled time, reducing power usage and helping to increase security by powering off devices that should not be in use during non-business hours. A unique "PD-alive" feature, ideal for surveillance networks, pings attached PDs (IP Cameras, wireless access points) and resets the PoE power when inactivity is detected.

10G SFP+ Stacking/Uplink Ports
The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Copper (DAC) cables or any compatible SFP+ transceiver1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Network administrators can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single stack. With 20 Gbps full-duplex capabilities, the DGS-1510 Series offers 10G connectivity to core networks and servers while still maintaining fast data transfer rates.

Features:

• 24 x 10/100/1000 PoE ports
• 2 x 1G SFP ports
• 2 x 10GbE SFP+ ports
• Advanced L2 switching and security features
• L2+ Static Routing
• Console port with full CLI
• Optional "standard mode" or "surveillance mode" management user interface
• 193W PoE budget

Specifications:

• Hardware version: DGS-1510-28 - A1
• Number of ports: GS-1510-28: 24 10/100/1000 Mbps, 2 Gigabit SFP, 2 10G SFP+
• Network Cables: UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
• Full/Half Duplex: Full/half duplex for 10/100 Mbps and Gigabit speed
• Switching Capacity: DGS-1510-28P - 92 Gbps
• Transmission Method: Store-and-forward
• MAC Address Table: 16,000 entries per device
• MAC Address Update: Up to 512 static MAC entries, Enable/disable auto-learning of MAC addresses
• Maximum 64 bytes Packet Forwarding Rate: DGS-1510-28P - 68.45 Mpps
• Media Interface Exchange: Auto or configurable MDI/MDIX
• Port Standards & Functions: IEEE 802.3 10BASE-T Ethernet; IEEE 802.3u 100BASE-TX Fast Ethernet; IEEE 802.3ab 1000BASE-T Gigabit Ethernet; 802.3ae 10 GbE; IEEE 802.3x Flow Control for Full-Duplex Mode; Auto-negotiation