Leader LT4610SER01 GPS and Time Code Option for LT4610
- Brands Leader Instruments Corporation
- Product Code:LR-LT4610SER01
- Availability:In Stock
-
$2,500.00
The LR-LT4610SER01 option adds GPS Sync Input, 10 MHz CW Sync Input and LTC Input/Output functions to the LR-LT4610. The time-code generator function is synced to Internal Time Information or GPS's Time Information, and available to generate ATC (LTC, LTC and AES/EBU Embedded Time-code) on the time information of GPS. This option is also equipped with a Holdover Function so that GPS signal and the CW signal phase and frequency will be held when there is a loss of signal.
Specifications:
- GPS Sync
- Compliance Standards: SMPTE ST 2059
- GPS Input
- Input Connector: 1 x BNC
- Input Impedance: 50Ω
- Antenna, Pre-amplifier: Power Supply
- Voltage: 5V, 3.3V, OFF
- Electric Current: 50 mA max. (built-in overcurrent protection circuit)
- GPS Receiving
- Reception Frequency: 1575.42MHz (L1)
- Reception Code: C/A code
- Receiving Sensitivity: Up to -130 dBm (input level into antenna)
- Hold Over Function: When the GPS signal is interrupted, holding the previous frequency and phase.
10MHz CW Sync - CW Input
- Input Connector: 1 x BNC
- Input Impedance: 50Ω
- Input Signal Level: 0.5 to 2Vp-p
- Input Signal Frequency: 10MHz
- Frequency Tolerance Range: ±5ppm
- Hold Over Function: When 10MHz CW signal is interrupted, holding the previous frequency.
LTC Input/Output - Compliance Standards and Output: SMPTE 12M-1 Input
- In/Output Connector: D-SUB 15 pin (Input and output shared)
- Number of Input: 1
- Input Impedance: 10kΩ balanced
- Input Signal Level: 0.5 to 4 Vp-p
- Number of Output: 3
- Output Impedance: 600Ω balanced
- Output Signal Level: 2 Vp-p±10%
Time-Code - Reference Time: Internal/GPS/LTC
- Frame Rate: Synced with ANALOG BLACK 1
- Drop Frame Mode: On, Off
- ATC/LTC Setting Output Setting: On, Off
- Timing Adjustment Range: s42ms (Increase and decrease depending on frame rate)
- Timing Adjustment Unit: 0.01ms
- AES/EBU Time-code Insert Setting: On, Off
- Leap Second Apply Setting: Timer setting the application date and time.
- Summer Time Apply Setting: Timer setting the application date and time.